Motorola MPC8260 User Manual
7-14
MPC8260 PowerQUICC II UserÕs Manual
MOTOROLA
Part III. The Hardware Interface
7.2.7.1.1 Data Bus (D[0Ð63])ÑOutput
Following are the state meaning and timing comments for the D[0Ð63] output signals.
Following are the state meaning and timing comments for the D[0Ð63] output signals.
State Meaning
Asserted/NegatedÑRepresents the state of data during a data write.
Byte lanes not selected for data transfer do not supply valid data.
MPC8260 duplicates data to enable valid data to be sent to different
port sizes.
Byte lanes not selected for data transfer do not supply valid data.
MPC8260 duplicates data to enable valid data to be sent to different
port sizes.
Timing Comments
Assertion/NegationÑInitial beat coincides with DBB, for bursts,
transitions on the bus clock cycle following each assertion of TA and,
for port size, transitions on the bus clock cycle following each
assertion of PSDVAL.
transitions on the bus clock cycle following each assertion of TA and,
for port size, transitions on the bus clock cycle following each
assertion of PSDVAL.
High ImpedanceÑOccurs on the bus clock cycle after the Þnal
assertion of TA, TEA, or certain ARTRY cases.
assertion of TA, TEA, or certain ARTRY cases.
7.2.7.1.2 Data Bus (D[0Ð63])ÑInput
Following are the state meaning and timing comments for the D[0Ð63] input signals.
Following are the state meaning and timing comments for the D[0Ð63] input signals.
State Meaning
Asserted/NegatedÑRepresents the state of data during a data read
transaction.
transaction.
Timing Comments
Assertion/NegationÑData must be valid on the same bus clock cycle
that TA and/or PSDVAL is asserted.
that TA and/or PSDVAL is asserted.
7.2.7.2 Data Bus Parity (DP[0Ð7])
The eight data bus parity (DP[0Ð7]) signals both output and input signals.
7.2.7.2.1 Data Bus Parity (DP[0Ð7])ÑOutput
Following are the state meaning and timing comments for the DP[0Ð7] output signals.
Following are the state meaning and timing comments for the DP[0Ð7] output signals.
State Meaning
Asserted/NegatedÑRepresents odd parity for each of 8 bytes of data
write transactions. Odd parity means that an odd number of bits,
including the parity bit, are driven high. The signal assignments are
listed in Table 7-1.
write transactions. Odd parity means that an odd number of bits,
including the parity bit, are driven high. The signal assignments are
listed in Table 7-1.
Table 0-1. Data Bus Lane Assignments
Data Bus Signals
Byte Lane
D0ÐD7
0
D8ÐD15
1
D16ÐD23
2
D24ÐD31
3
D32ÐD39
4
D40ÐD47
5
D48ÐD55
6
D56ÐD63
7