Manualsbrain.com
  1. Manuals
  2. Brands
  3. Sony
  4. PCS-1P
  5. User Manual

Sony PCS-1P User Manual

Download
Page of 78
3-14
PCS-1/1P
Primary DNS:
Cannot be set.
Secondary DNS:
Cannot be set.
2.
Confirm that the IP address displayed in the launcher menu of teleconference terminal B is
211.10.10.10.
3.
The LAN setup menu of teleconference terminal A is set as described below.
DHCP Mode:
OFF
Host Name:
Blank
IP Address:
Blank
Network Mask:
Blank
Gateway Address:
Blank
DNS Address:
Blank
Gatekeeper Mode:
OFF
Gatekeeper Address:
Blank
User Alias:
Blank
User Number:
Blank
SNMP Mode:
OFF
Trap Destination:
Blank
Community:
public
Description:
Videoconference Device
Location:
Blank
Contact:
Blank
NAT Mode:
OFF
NAT Address:
Blank
Packet Resend Request: ON
Adaptive Rate Control: ON
LAN Mode:
Auto Nagotiation (This mode is changed to a proper mode when mismatching
occurs in the mode. Refer to “4-2. PCS-1/1P and Hub setting”.)
Port Number Used:
Default
TCP Port Number:
2253
UDP Port Number:
49152
TOS:
OFF
PPPoE:
ON
PPPoE User Name:
User (account) name acquired from a provider
PPPoE Password:
Password acquired from a provider
Fixed IP for PPPoE:
On (When fixed IP is acquired)
Fixed IP Address for PPPoE: 210.10.10.10
PPPoE DNS:
Obtain automatically (Acquired from a provider.  Select “Set” when the
fixed DNS server address is specified.  Enter the addresses specified from a
provider in “Primary DNS” and “Secondary DNS”, respectively.)
Primary DNS:
Cannot be set.
Secondary DNS:
Cannot be set.
4.
Confirm that the IP address displayed in the launcher menu of teleconference terminal A is
210.10.10.10.
5.
Enter LAN in the phone book of teleconference terminal A for a line I/F, IP address 211.10.10.10 of
teleconference terminal B in it for an IP address, and other required items.  After that, register
teleconference terminal B in the phone book and initiate a call.  Or set LAN for a line I/F and IP
address 211.10.10.10 of teleconference terminal B for an IP address by Dial, and then initiate a call.