Furuno 1834C-BB User Manual
2-6
Jumper block, slide switch setting
The jumper block JP1 and slide switch S112 on the PWR board (03P9419) must be set
according to radar model. Open the unit, locate JP1 and S112 and set them as below.
according to radar model. Open the unit, locate JP1 and S112 and set them as below.
FR-8252
S
S112
T
MODEL1964C
Jumper block JP1
("open" for this radar;
leave the dummy
connector attached)
("open" for this radar;
leave the dummy
connector attached)
Slide switch S112
(Downward position
for this radar)
(Downward position
for this radar)
Power supply unit, inside view
Jumper block, slide switch
Function
Setting
JP1
Enables/disables motor slow start circuit.
Open (enable)
S112
TUNE voltage selector (0-12 V, 0-32 V)
Downward position
(0-32 V)
(0-32 V)