Multi-Tech Systems MVP2400 User Manual
MultiVOIP User Guide
Technical Configuration (Analog)
165
Local Configuration
This manual describes local configuration only. For information on
remote configuration and management, see the MultiVoipManager
documentation.
remote configuration and management, see the MultiVoipManager
documentation.
Pre-Requisites
To complete the configuration of the
MultiVOIP unit, you must know several
things about the overall system.
MultiVOIP unit, you must know several
things about the overall system.
Before configuring your MultiVOIP Gateway unit, you must know the
values for several IP and telephone parameters that describe the IP
network system and telephony system (PBX or telco central office
equipment) with which the digital MultiVOIP will interact. If you plan
to receive log reports on phone traffic by email (SMTP), you must
arrange to have an email address assigned to the VOIP unit on the
email server on your IP network.
values for several IP and telephone parameters that describe the IP
network system and telephony system (PBX or telco central office
equipment) with which the digital MultiVOIP will interact. If you plan
to receive log reports on phone traffic by email (SMTP), you must
arrange to have an email address assigned to the VOIP unit on the
email server on your IP network.
IP Parameters
The following parameters must be known about the network (LAN,
WAN, Internet, etc.) to which the MultiVOIP will connect:
WAN, Internet, etc.) to which the MultiVOIP will connect:
➼
Ask your computer network
administrator.
administrator.
Info needed to operate:
all MultiVOIP models.
all MultiVOIP models.
IP Network Parameters:
Record for each VOIP Site
in System
Record for each VOIP Site
in System
@
•
IP Address
•
IP Mask
•
Gateway
•
Domain Name Server (DNS) Info
(not implemented; for future use)
Write down the values for these IP parameters. You will need to enter
these values in the “IP Parameters” screen in the Configuration section
of the MultiVOIP software. You must have this IP information about
every VOIP in the system.
these values in the “IP Parameters” screen in the Configuration section
of the MultiVOIP software. You must have this IP information about
every VOIP in the system.