Polycom A800 User Manual

 

 Configuration Guide 

PN: 1725-36080-001_J.doc 

6 

Connecting to the Mobility Controller 

Command, comment, and screen text key 

In the sections below you will find commands, comments, prompts, 
system responses, or other screen-displayed information involved in 
the configuration process. This key explains the text styles and 
symbols used to denote them. 

Typed command 

Encryption key, domain name or other information 
specific to your system that needs to be entered 

(xxxxxxxx) 

Comment about a command or set of commands 

xxxxxxxx 

Prompt, system response or other displayed information 

Via console 

1.  Using a standard RS-232 cable, connect the Aruba mobility 

controller to the serial port of a terminal or PC. 

2.  Run a terminal emulation program (such as HyperTerminal™) or 

use a VT-100 terminal with the following configuration: 

Bits per second:

 9600 

Data bits:

 8 

Parity:

 None 

Stop bits:

 1 

Flow control:

 None 

3.  Press Enter to display the Aruba mobility controller login screen. 
4.  Enter the default login: 

 and the default password: 

. 

These are case sensitive. 

5.  Enter 

 and the default password: 

 to get into the 

command mode.