Polycom A800 User Manual
Aruba Mobility Controllers: A200, A800, A2400, A6000
PN: 1725-36080-001_J.doc
7
Via the CLI
By default, only SSH (Secure Shell) access to the switch (mobility
controller) is permitted.
controller) is permitted.
1. From a management system that has network connectivity to the
switch, connect to the switch using SSH:
ssh admin@<switch IP address>
2. Enter the admin password at the password prompt.
3. Type
3. Type
enable
at the > prompt to enter the enable mode.
4. Type the enable password when prompted for a password.
Via the Web interface
Once the connectivity to the switch is verified, open a Web browser
and enter the switch’s IP address in the navigator bar.
The switch can be accessed using http at http://<switch IP Address>
or https at https://<switch IP Address>:4343.
The user is prompted with the username and password configured (in
the example above, the
and enter the switch’s IP address in the navigator bar.
The switch can be accessed using http at http://<switch IP Address>
or https at https://<switch IP Address>:4343.
The user is prompted with the username and password configured (in
the example above, the
username
/
password
configured is
admin
/
admin
). On successful login the following
Network Summary
screen is displayed: