Polycom A800 User Manual
Configuration Guide
PN: 1725-36080-001_J.doc
8
Initial Setup
Before starting, please ensure that the Policy Enforcement Firewall
module license is enabled on the Aruba mobility controller. Please
contact Aruba Networks for licenses and installation information.
On power-up, the user is presented with the startup wizard:
module license is enabled on the Aruba mobility controller. Please
contact Aruba Networks for licenses and installation information.
On power-up, the user is presented with the startup wizard:
Enter System name [Aruba800]: Aruba
Enter VLAN 1 interface IP address [172.16.0.254]:
Enter VLAN 1 interface subnet mask [255.255.255.0]:
Enter IP Default gateway [none]:
Enter Switch Role, (master|local) [master]: master
Enter Country code (ISO-3166), <ctrl-I> for supported
list: US
list: US
You have chosen Country code US for United States
(yes|no)?: yes
(yes|no)?: yes
Enter Password for admin login (up to 32 chars): admin
Re-type Password for admin login: admin
Enter Password for enable mode (up to 15 chars): enable
Re-type Password for enable mode:
enable
Do you wish to shutdown all the ports (yes|no)? [no]: no
Current choices are:
System name: Aruba
VLAN 1 interface IP address: 172
.
16.0.254
VLAN 1 interface subnet mask: 255.255.255.0
IP Default gateway: none
Switch Role: master
Country code: US
Ports shutdown: no
If you accept the changes the switch will restart!
Type <ctrl-P> to go back and change answer for any
question
question
Do you wish to accept the changes (yes|no)yes