Q-Logic 6140 User Manual
4 – Installation
Installing the SANbox 6140 Router
FI0154601-00 C
4-3
A
Installing the SANbox 6140 Router
Unpack the router and accessories. The SANbox 6140 router is shipped with the
following components, shown in
following components, shown in
Power cord
Dongle for connecting the router’s serial port to a workstation used for
configuring and managing the router. A standard Cat5 Ethernet cable is
required (not supplied) to connect the dongle to the router. The dongle
connects directly to the workstation’s serial (COM) port.
configuring and managing the router. A standard Cat5 Ethernet cable is
required (not supplied) to connect the dongle to the router. The dongle
connects directly to the workstation’s serial (COM) port.
Figure 4-1 SANbox 6140 Router and Accessories
To install the SANbox 6140 router:
1.
Complete the pre-installation checklist (see
2.
3.
Install the transceivers (see
4.
5.
Configure the management workstation (see
).
6.
Install the management application (see
7.
Start the management application (see
).
8.
Connect the router to AC power (see
9.
Configure the router (see
).
10. Cable devices to the router (FC and iSCSI) (see