Barco 26-0405000-00 User Manual
104
PresentationPRO-II • User’s Guide
6. Operations
Working with Layers
4. In the Layer Functions Section, press TRANS. The current PIP transitions off
and the new KEY transitions on. The
TRANS button lights during the interval.
5. Adjust the Key’s clip, gain, mode, opacity, fill source, size and position, crop,
source size and special effects desired. Refer to the “
“ section on page 107 for details.
jçÇáÑóáåÖ=mfmë
Use the following steps to modify a PIP:
S
Assumption: A PIP is currently on Program.
1. In the Layer Functions Section, ensure that the PIP button is blinking. If not,
press
PIP to display the PIP Adjustment Menu. On the Source Selection Bus,
the source associated with the PIP will be solid.
2.
Size and Position
— Adjust
H Size, V Size, H Position and V Position as
desired. In Chapter 4, refer to the "
" section
on page 58 for menu details.
3.
Source Size
— From the
PIP Adjustment Menu, press {SRC} to display the
Input Source Adjustment Menu. Use the menu to adjust the source image’s
size and position within the PIP. In Chapter 4, refer to the "
size and position within the PIP. In Chapter 4, refer to the "
4.
Crop
— From the
PIP Adjustment Menu, press {CROP} to display the Crop
Adjustment Menu. Use the menu to select the type of crop, the aspect ratio, and
the image’s H and V size. In Chapter 4, refer to the "
the image’s H and V size. In Chapter 4, refer to the "
" section on
page 61 for menu details.
5.
Border
— From the
PIP Adjustment Menu, press {BORDER} to display the
Border Menu. Use the menu to select the border’s style, color and size. In
Chapter 4, refer to the "
Chapter 4, refer to the "
6.
Shadow
— From the
Border Menu, press {SHADOW} to display the Shadow
Menu. Use the menu to choose the shadow’s size, position and transparency. In
Chapter 4, refer to the "
Chapter 4, refer to the "
7.
Special Effects
— From the
Border Menu, press {EFX} to display the Image
Effects Menu. Use the menu to select monochrome or color mode, to modify
chroma and hue, to invert the color, and to set a strobe effect. In Chapter 4, refer
to the "
chroma and hue, to invert the color, and to set a strobe effect. In Chapter 4, refer
to the "
" section on page 63 for menu details.
8.
Global Functions
— Remember that the following global functions are always
available to you:
~
Press
Reset to reset the current effect (e.g., PIP, Key, crop, etc.) to a
nominal default value.
~
Press
Full Screen to bring the PIP to full screen, using the source’s
height as the defining factor.
~
Press
Freeze to freeze the PIP. Press again to unfreeze.
Note
Because the PIP is on Program, it is recommended that you
make slow, smooth adjustments during a live production.
make slow, smooth adjustments during a live production.