Barco 26-0405000-00 User Manual

Ethernet Upgrade Method

13.  It takes approximately 6 minutes to load the flash memory using the Serial 

method.  When complete, the Flash Loader utility displays the “

Complete” message.  Click OK to continue.

14.  Cycle power on the PresentationPRO-II unit, and exit the Flash Loader utility.

15.  On PresentationPRO-II, perform a factory reset.  

a.  From the Home Menu, press {SYSTEM} to access the System Menu.

b.  From the System Menu, press {RESET} to display the Reset Menu. 

c.  On the Reset Type line, select FACTORY.   

d.  Press {RESET}.  When the confirmation screen appears, press {YES} to 

reset the system to factory default values.

16.  On PresentationPRO-II, verify that the new software has been loaded correctly:

a.  From the Home Menu, press {SYSTEM} to access the System Menu.

b.  From the System Menu, press {SW VER} to display the Software 

Version Menu, then verify the new version.

„

Use the following steps to upgrade PresentationPRO-II software using an Ethernet 
connection to your PC:

1.  Ensure that your PC (or laptop) uses the Windows

®

 2000 or XP operating 

systems.

2.  Ensure that your PC (or laptop) has RS-232 Serial Terminal software installed, 

such as 

HyperTerminal.  This software enables the PC to send serial commands 

to the PresentationPRO-II unit. 

3.  Please note the following important points:

Do not connect PresentationPRO-II to a Local Area Network (LAN) with 
an existing DHCP server running.

The factory default IP address for the PresentationPRO-II system is 
192.168.0.10, so the PC will use 192.168.0.191 as its IP address.

4.  Download the latest PresentationPRO-II firmware update from the web:

a.  On the web, navigate to 

b.  Click “Downloads” to access the Downloads Page.

c.  Using the “Select Video Product” pull-down menu, click 

PresentationPRO-II.

d.  In the “Software” section, click the Download button for the latest 

version of code.

e.  When the File Download Dialog appears, click Save to save the file to 

your computer.

Use caution when performing this step, as all saved files and 
saved still frames will be erased.