ZyXEL Communications IES-612-51A User Manual

Chapter 41 Commands Summary

IES-612-51A User’s Guide

Administrators with middle privilege access can use middle or low privilege commands.

Administrators with the low privilege level are restricted to using only low privilege 
commands. Low privilege commands are read only.

Use the following command to save your configuration when you are done with a 
configuration session.

ras> config save

1

Do not turn off your IES-612-51A while saving your configuration.

This command saves all system configurations to nonvolatile memory. You must use this 
command to save any configuration changes that you make, otherwise the IES-612-51A 
returns to its default settings when it is restarted. Save your changes after each configuration 
session.

Nonvolatile memory refers to the IES-612-51A’s storage that remains even if the IES-612-
51A’s power is turned off. Run-time (memory) is lost when the IES-612-51A’s power is 
turned off.

The following table lists commands that you can use with the IES-612-51A. 

The P column on the right indicates the administrator privilege level needed to use the 
command (H for high, M for middle or L for low) and the equivalent in the web configurator 
(H for high or L for low).

Table 88   Commands

sys

info show

Displays general system 
information.

L/L

info hostname

<hostname>

Sets the system name.

M/L

info location

<location>

Sets location information.

M/L

info contact

<contact>

Sets contact person information.

M/L

reboot

[show|sec|cancel]

Sets the reboot timer or displays 
the timer and remaining time for 
reboot. If a reboot has been 
scheduled, use this command to 
prevent a reboot.

H/H

snmp show

Displays SNMP settings.

M/L