Epson DH200 User Manual

Using the Main Menu

CAMERA

Configure various camera settings,
such as brightness, contrast, title,
and covert.

To configure camera settings:

1. Under CAMERA SELECTION, press

select the camera.

2. Press

to configure the following:

• COVERT: Select YES/NO. If YES, the camera

channel will be obscured from live viewing to
give the impression that no camera is
recording. Use this option if the display
monitor is in public view.

NOTE:

The Covert channel will use the

same background color as a
disconnected camera. To change the
background color, see “DISPLAY” on
page 22.

• BRIGHTNESS, CONTRAST, COLOR: Adjust

from 0~100.

• TITLE: Use the alpha-numeric buttons on the

remote control to enter a name/title for the
camera. Press WX to move the cursor left/
right. If you make a mistake, press CANCEL/
ESC to return to the Main Menu and start
again.

• PTZ MODEL: Select the model of your

connected PTZ camera (not included).

• PTZ ID: Enter your PTZ ID (PTZ ID should

match the camera channel to which you have
connected the PTZ camera)

3. Repeat for other camera connected to the

system.

4. Press

ENTER

to save your settings. Press

CANCEL/ESC

to close remaining menu

windows.

MOTION

Configure the motion grid and
motion sensitivity for specific
channels.

NOTE:

If motion detection is applied to a

camera, the system will record from that
camera

only

when motion is detected.

To configure motion settings:
1. Under RECORD TIME, adjust the time from

10~300 seconds.

NOTE:

The set recording time is

applicable to all channels.

2. Press

to select CAMERA SELECTION

and press

to select the camera.

3. Press

to select SENSITIVITY, and adjust

from 1~20. The higher the number, the
greater the sensitivity.

4. Press

to select MOTION GRID. Press

to move the cursor to the Motion Grid.

5. Press

to select blocks on

the grid. A green motion icon
appears on the grid.

• Press

STWX

to select a

block on the grid

Figure 13.0 Camera menu

Figure 14.0 Motion menu