Sharp UX-A1000 User Manual

Problems and Solutions

No dial tone when you 
pick up the handset or 
press the SPEAKER key.

• Make sure the handset cord is connected to the 

correct jack. See 

Connecting the handset

 on page 11.

• Make sure that the telephone line is properly 

connected to both the TEL. LINE jack and the wall 
jack (see page 11).

• Make sure that the telephone line is good.

Dialing is not possible.

• Make sure the power cord is properly plugged into a 

power outlet.

• Make sure that the telephone line is properly 

connected to both the TEL. LINE jack and the wall 
jack (see page 24).

• Make sure that the fax machine is set to the correct 

dialing mode for your telephone line. See 

Dial mode

 

on page 24.

The power is on, but no 
transmission takes place.

• Make sure that the receiving machine has paper.

• Make sure that the telephone line cord is plugged into 

the TEL. LINE jack, and not the TEL. SET jack.

• If the receiving machine is in manual mode with no 

attendant, reception will not be possible.

• Check the display for error messages.

• Pick up the handset and check for a dial tone. Dial the 

receiving machine manually and make sure that it is 
responding (you should hear a fax tone).

Nothing is printed at the 
receiving end.

• Make sure that the document for transmission is 

placed face down in the feeder.

all.book  Page 114  Wednesday, November 12, 2003  9:50 AM