Telular SX5T CDMA User Manual
Phonecell
®
SX5T CDMA2000
12
User Manual
Adjusting Your Phone’s Settings
Volume Level
If the volume level on your phone’s receiver is too high or too low during a call, you can adjust the
levels using the telephone keypad.
levels using the telephone keypad.
To increase the phone’s volume level:
• Press .
To decrease the phone’s volume level:
• Press .
Entering Configuration Mode
Many device configuration settings require you to enter Configuration Mode – the device’s
programming mode – before you may input the commands.
programming mode – before you may input the commands.
To enter Configuration Mode:
• Press
<lock code>
.
You will hear a steady tone indicating that you have entered Configuration Mode. When you press
any additional key, the tone will stop.
any additional key, the tone will stop.
If you correctly enter a configuration sequence for any of the settings listed, the steady tone will
return and the SX5T will have accepted the new setting. If you do not enter a valid sequence, you will
hear three brief ascending tones followed by the steady tone (at which point you may re-enter your
configuration settings).
return and the SX5T will have accepted the new setting. If you do not enter a valid sequence, you will
hear three brief ascending tones followed by the steady tone (at which point you may re-enter your
configuration settings).
To exit Configuration Mode, simply hang up the phone.
Changing the Lock Code
Your SX5T is preconfigured with a lock code for use in entering Configuration Mode and to use
with the Call Barring feature.
with the Call Barring feature.
The default lock code is the last four digits of the phone number.
(If no number is programmed, the default is 0000).
You may use Configuration Mode to change your lock code to any 4-digit number.
To change the Lock Code:
• From Configuration Mode, press
<old lock code>
<new lock code>
<new lock code>
.
(For example, to change the default lock code from 0000 to 5555, press
.)
#
5
5
5
5
*
5
5
5
5
*
0
0
0
0
*
3
4
1
*
#
#
*
*
*
3
4
1
*
#
Note:
You may change multiple settings during a single Configuration Mode session. If you enter an
incorrect sequence during a Configuration Mode session, only the setting you were entering will need
to be re-entered; all previous changes will be retained.
incorrect sequence during a Configuration Mode session, only the setting you were entering will need
to be re-entered; all previous changes will be retained.
#
*
0
*
#
Note:
The SX5T volume setting allows you to adjust the volume three levels from the default setting. The
adjusted volume setting remains in effect for future calls until it is manually changed. When the SX5T’s
power is turned Off and On, the default mid-range volume setting is restored.
adjusted volume setting remains in effect for future calls until it is manually changed. When the SX5T’s
power is turned Off and On, the default mid-range volume setting is restored.
3
*
#
8
*
#