Panasonic Section 520 User Manual

Section 520 - TSAPI

Chapter 3. Installation

DBS-92-520

Issued April 2000

  11

Range: 1 to 8

Default: 1

Runtime modifiable: No

Purpose: Specifies which serial port on the server PC is connected to the 
DBS for Telephony Services.

Range: 9600 or 19200

Default: 9600

Runtime modifiable: No

Purpose: Specifies the DBS API baud rate. This must match the DBS 
setting.

Range: 1 to 3

Default: 2 (Medium)

Runtime modifiable: No

Purpose: Specifies the CSTA stream control security level. The values 1, 
2, and 3 translate to CSTA ranges High (all commands checked for 
validity), Medium (login only checked for validity), and None (no checks 
performed), respectively. Most client applications require level 2 or 
above.

Range: 10-699

Default: -1 (disabled)

Runtime modifiable: Yes

Purpose: Specifies the activator extension of a CSTA set message waiting 
indicator request. Normally supplied through private data, most 
applications are not written to support this option for Panasonic -- this 
allows the command to be honored by the driver and passed to the DBS. 
If not set, and private data not supplied, the command is rejected.

Range: 0 or 1

Default: 1 (Enabled)

Runtime modifiable: Yes

Purpose: Specifies whether the driver should send CSTA failed events to 
the application when receiving busy tone from the DBS on a given 
monitored extension