Kathrein 9986492 User Manual

 

49

In this menu, the video carriers -each 
according to optional assignment- can be 
measured on IF levels (38.9 MHz 
analogue and 36.15 MHz digital) or on the 
entire return path area (Optional return 
path card) from 4 MHz to 80 MHz.  

The return path frequency can be entered 
in with the numerical button, „0...9,“  with 
the cursor buttons, ◄►, in 50 kHz 
increments. The frequency is displayed in 
the lower left-hand corner.  

By pressing this button, he RF spectrum 
can be inverted. This mean, that the video 
and audio carrier for digital modulation, 
the I and Q vectors can be exchanged.  

Access the analogue menu with the buttons, “analog” and “RP MEAS-
URE.” In this menu, settings and measurements of analogue signal are 
possible (For further information, refer to the TV Analog menu).  

Access the digital menu with the buttons, “digit. DVB-C” and “RP 
MEASURE”. In this menu, settings and measurements of the DVB-C 
signals are possible. IF demodulation if DVB-T signals is also possible 
(For further information, refer to the TV digital menu). 

In this menu, all remotely controlled parameters, such as remote feeding voltage, 
22 kHz, DiSEqC, tone burst (simple DiSEqC), V-SEC, can be set (for further infor-
mation, refer to TV menu). 

 

 

ÍΠRP

➧