Avaya S8100 User Manual

Install and wire telephones and other equipment

To install the optional selector console:

Connect the supplied 3-foot (0.9 m) D8AC cable to the modular jack on the bottom of the 26B1 
selector console.

Route the cable to the attendant console and connect to the DXS/BLF jack.

Attach labels according to the Attendant Console form.

Administer the attendant console using Administrator’s Guide for Avaya Communication 
Manager (555-233-506).

The 1152A1 Mid-Span power-distribution unit (PDU) is an Ethernet power supply that provides power to 
up to 24 46xx-series IP telephones or wireless LAN (WLAN) access points. This unit is used with a 
10/100BaseTx standard Ethernet network over a standard TIA/EIA-568 Category 5, 6 or 6e cabling plant. 
The 1152A1 meets the current requirements of the IEEE802.3af standard for resistive detection.

The 1152A1 PDU complies with the Underwriters’ Laboratories, Inc. (UL) standard UL 1950, 2

nd

 

edition.

For safety instructions, see 

 on page 109. For installation instructions, see 

 on page 111.

Please read the following helpful tips. Retain these tips for later use.

When using this switch, the following safety precautions should always be followed to reduce the risk of 
fire, electric shock, and injury to persons.

Read and understand every instruction.

Follow every warning and instruction marked on the switch.

This product can be hazardous if immersed in water. To avoid the possibility of electrical shock, 
do not use it near water.

The 1152A1 PDU contains components sensitive to electrostatic discharge. Do not touch the 
circuit boards unless instructed to do so.

Approved

CSA C22.2 No.950 Std.

Approved

CE Regulatory Compliance

Approved

EN 60950

Approved

TUV EN 60950