User ManualTable of ContentsConfiguring the Transmitter for Operational Use1Front Panel Connectors8Microphone/Diagnostics Connector8Reference Connector8Rear Panel Connectors9MARC Connector10MARC Audio Connector11MARC Data Connector13T1/E1 Connector14HDLC Connector15External Speaker16Facilities Connector17Maintenance19Introduction20Configuration20Hardware Configuration20Software Configuration21Replacement Modules21Scheduled Maintenance22Cleaning and Checking Security of Connectors22Setting the Transmitter Internal Reference Frequency22Setting a 5-Offset Carrier Frequency23To Initiate a BIT Test24AC and DC Change-over Check25Unscheduled Maintenance26Introduction27Molex KK Connectors27Tools, Materials and Test Equipment Required27T6T VHF Amplifier Procedures28Top and Bottom Covers28Removing and Refitting the Interface Module28Removing and Refitting the PSU Regulation Module30Removing and Refitting the Power Supply Modules31Removing and Refitting the Combiner BIT Module32Removing and Refitting the PA Modules34Removing and Refitting the Front Panel PCB36Removing and Refitting the Cooling Fans37T6T VHF Drive Assembly Procedures38Removing the Top Cover38Removing and Refitting the Processor Module38Removing and Refitting the PSU Regulation Module40Removing and Refitting the Drive Module42Removing the Bottom Cover43Removing and Refitting the PA Control Module43Removing and Refitting the Power Supply45Removing and Refitting the Front Panel PCB46Virtual Front Panel (VFP)48Installing the VFP Software49VFP Features49The Menu Bar49Settings Window50Channels Window50BIT Window50Status Information Window50To Change the Drive Assembly Profile or Save a Profile51To Initiate a BIT Test52To Calibrate the Transmitter52Size: 2.71 MBPages: 72Language: EnglishOpen manual