Galil DMC-3425 Manual De Usuario
DMC-3425
Chapter 7 Application Programming
• 121
Examples
If the condition for the JP command is satisfied, the controller branches to the specified label or line
number and continues executing commands from this point. If the condition is not satisfied, the
controller continues to execute the next commands in sequence.
number and continues executing commands from this point. If the condition is not satisfied, the
controller continues to execute the next commands in sequence.
Instruction Interpretation
JP #Loop, COUNT<10
Jump to #Loop if the variable, COUNT, is less than 10
JS #MOVE2,@IN[1]=1
Jump to subroutine #MOVE2 if input 1 is logic level high. After
the subroutine MOVE2 is executed, the program sequencer
returns to the main program location where the subroutine was
called.
the subroutine MOVE2 is executed, the program sequencer
returns to the main program location where the subroutine was
called.
JP #BLUE,@ABS[V2]>2
Jump to #BLUE if the absolute value of variable, V2, is greater
than 2
than 2
JP #C,V1*V7<=V8*V2
Jump to #C if the value of V1 times V7 is less than or equal to the
value of V8*V2
value of V8*V2
JP#A
Jump to #A
Move the A motor to absolute position 1000 counts and back to zero ten times. Wait 100 msec
between moves.
between moves.
Instruction Interpretation
#BEGIN Begin
Program
COUNT=10
Initialize loop counter
#LOOP Begin
loop
PA 1000
Position absolute 1000
BGA Begin
move
AMA
Wait for motion complete
WT 100
Wait 100 msec
PA 0
Position absolute 0
BGA Begin
move
AMA
Wait for motion complete
WT 100
Wait 100 msec
COUNT=COUNT-1 Decrement
loop
counter
JP #LOOP,COUNT>0
Test for 10 times thru loop
EN
End Program
If, Else, and Endif
The DMC-3425 provides a structured approach to conditional statements using IF, ELSE and ENDIF
commands.
commands.
Using the IF and ENDIF Commands
An IF conditional statement is formed by the combination of an IF and ENDIF command. The IF
command has as its arguments one or more conditional statements. If the conditional statement(s)
evaluates true, the command interpreter will continue executing commands which follow the IF
command. If the conditional statement evaluates false, the controller will ignore commands until the
associated ENDIF command is executed OR an ELSE command occurs in the program (see discussion
of ELSE command below).
command has as its arguments one or more conditional statements. If the conditional statement(s)
evaluates true, the command interpreter will continue executing commands which follow the IF
command. If the conditional statement evaluates false, the controller will ignore commands until the
associated ENDIF command is executed OR an ELSE command occurs in the program (see discussion
of ELSE command below).