Bacharach INSIGHT Manual De Usuario

8

9

Inspect the flue-gas hose for cracks. If a hose is defective, replace the en-

tire probe assembly. 

Before using the analyzer, check that the Water Trap / Filter is dry and 

not dirty. If necessary, dry out the trap and replace the filter el e ment per 

Section 6.2. 

Perform the following steps to connect the probe assembly to the Fyrite 

INSIGHT:

1.  Push the probe’s sample-gas hose onto the GAS inlet fitting. 

2.  Push the probe’s draft hose onto the “+” pressure fitting.

3.  Push the probe’s thermocouple into the T-STACK jack 

 DO NOT force the thermocouple connector into 

4.  Push the optional ambient/primary-air thermocouple into the T-AIR 

jack.

Probe 
Tube

Water Trap/
Filter Assembly

USB Cable

Primary Ambient 
Air Thermocouple
(T-Air) (Optional)

Sample Gas 
Hose

Sample Gas 
Thermocouple 
Connector (T-Stack)

Draft 
Hose

Probe 
Stop

Probe 
Handle

AC Power 
Adapter Jack
(Power)

Differential 
Pressure Hose
(Optional)