Bacharach INSIGHT Manual De Usuario

10

11

The analyzer is preset at the factory for the parameters shown below, but  

can be changed as described in their corresponding sec tions.

Fuel

Natural Gas

Section 4.3

Temperature Unit

°F

Section 3.5.2

Pressure Unit

InWC

Section 3.5.3

Language

English

Section 3.5.10

CAL Reminder

Never

Section 3.5.12

Clock

Not Initialized

Section 3.5.4

1.  Display the MAIN MENU by pressing the 

 button.

2. Use the ▲▼ buttons to highlight SETUP 

and press ENTER to display the SETUP 
MENU. 

Select to display temperature in either ºF or ºC as follows:

1.  Enter the Setup Menu per Section 3.5.1. If necessary, press ESC 

until MENU appears above F2.  

2. From the SETUP MENU, use the ▲▼ but-

tons to select TEMPERATURE UNITS.  

Press ENTER to display the Temperature 

Units Menu.

3. Use the ▲▼ buttons to select the desired 

temperature unit.

4. Press ENTER to save selection and return 

to the SETUP MENU or ESC to revert the 

previous setting.

Note that a push button may perform several functions, depending on the 

analyzer’s model number and what screen is being displayed at the time.

• Powers the analyzer ON and OFF. Hold this button down for 

at least 2 seconds to turn the power OFF.

• Toggles the backlight ON and OFF while the analyzer is 

turned ON.

  

• Scrolls up, down, left, and right through the display screen 

options.

 • Up and Down arrows cause the displayed value to in-

crease or decrease correspondingly.

 

• Acts as an ENTER button.  Performs the action selected.

 

 • While in the HOLD screen, turns the sample pump on, dis-

plays the RUN screen, and begins a combustion test.

 • While in the RUN screen, turns the sample pump off, displays the 

HOLD screen and the last set of combustion data.

 • Displays the HOLD screen while pressing it from most menus. 

 • Return the display to the HOLD screen while pressing it during the 

5 second power down sequence.

 

• Cancels most operations and displays the previous screen.

•  Pressing function keys accepts the corresponding function 

defined at the bottom of the display, including PRINT, SAVE, 
MENU, differential pressure ZERO, differential temperature 
ZERO, PAGE UP, PAGE DOWN and CLEAR data.