Harman Stove Company 1-90-797000 Manual De Usuario

21

Save These Instructions                                                                  3-90-798                                                             Dry Seasoned Wood Only!

1.  An outside air inlet must be provided for combus-

tion air, and must remain clear of leaves, debris, 

ice, and/or snow. The outside air path must be 

unrestricted while the appliance is in operation.

2.  The combustion air intake system must be of 

metal construction. It must permit zero-clearance 

to combustible materials, and contain a rodent 

screen.

3.  The appliance must be secured to the mobile 

home structure by bolting it to the floor. There are 

brackets included, you'll need to secure with the 

proper length lag bolts.

4.  The appliance must be grounded to the metal 

framing of the mobile home

5.  All clearances to combustibles and floor protection 

requirements must be followed.

6.  Follow the vent manufacturer's instructions when 

installing in a mobile home.

7.  Installation shall be in accordance with the Manu-

factured Home and Safety Standard (HUD) CFR 

3280, Part 24

8.  The appliance must never be installed in a room 

designated for sleeping.

This diagram shows the bracket that was used 

to bolt the stove to the pallet. Use at least two 

of these brackets for securing the appliance 

through the floor in a mobile home installation. 

The bracket will slip over the top of the leveling 

adjuster. The installer will need to determine and 

obtain the properly sized lag bolts.