Harman Stove Company 1-90-797000 Manual De Usuario

22

 Dry Seasoned Wood Only!                                                              3-90-798                                                                 Save These Instructions

Parts and Supplies Needed: 1 piece of metal flexible 

pipe, 4" X needed length. 1 Rodent Screen, and alu-

minum tape. Plus, a trim ring for finishing around the 

pipe on the inside wall. 

1.  Determine an appropriate hole location, through 

the wall. Be sure there are no studs or other sup-

porting members. Also ensure there are no electri-

cal wires or plumbing contained within the wall. 

2.  Make the hole through the exterior wall using a 

hole saw or reciprocating saw. You'll want the hole 

to be just slightly larger than the metal flex pipe.

3.  Attach the rodent screen to one end of the flex 

pipe, and insert it through the wall until the back of 

the screen cover is against the outside surface. 

4.  Hold the flex pipe in place to make an accurate 

determination of the length needed. Cut the flex 

pipe to length.

5.  Slide the trim ring onto the flex for the inside wall 

portion.

6.  Slide the other end of the metal intake flex pipe 

into the stub on the rear of the Oakleaf and secure 

it with aluminum tape. This air intake will supply 

outside air for the secondary combustion within 

the FireDome.

7.  Secure the trim ring in place for finishing the inside  

wall area.

8.  Seal around the rodent screen on the exterior wall, 

using silicone caulking.

Outside Air 

Attachment

To adjust the leveling bolts, you must first loosen the 

locking nut. Turn the leveling bolt to the desired posi-

tion, and tighten the locking nut against the cast iron 

leg. 

The optional cooking grill #1-00-08121 installs easily 

in the top load opening of the Oakleaf. 

The grill handle (B) fits in the slots (C) on each side. 

To remove the handle, lower and turn.

When installed, the grill hangs in the opening by the 

hooks (A).

When grilling, you'll want to keep the fire size small 

and the bypass damper in the open position. Depend-

ing on the grilling being done, you may get grease 

dripping on the glass causing it to become dirty and 

obstructed. When you burn your next hot fire, the 

glass will likely clean itself.