Graco P39LCS Manual De Usuario

The equipment must be grounded. Grounding reduces 

the risk of static and electric shock by providing an 

escape wire for the electrical current due to static build 

up or in the event of a short circuit.

Pump: use a ground wire and clamp. Loosen the 

grounding lug locknut and washer. Insert one end of a 
1.5 mm

2

 (12 ga) minimum ground wire into the slot in 

lug and tighten the locknut securely. Connect the other 

end of the wire to a true earth ground. Order Part 

237569 Ground Wire and Clamp.

Air and fluid hoses: use only electrically conductive 

hoses.

Air compressor: follow manufacturer's recommenda-

tions.

Spray gun/dispense valve: ground through connection 

to a properly grounded fluid hose and pump.

Fluid supply container: follow your local code.

Object being sprayed: follow your local code.

Solvent pails used when flushing: follow local code. 

Use only conductive metal pails, placed on a grounded 

surface. Do not place the pail on a nonconductive sur-

face, such as paper or cardboard, which interrupts 

grounding continuity.

relieving pressure: hold metal part of the spray 

gun/dispense valve firmly to the side of a grounded 

metal pail, then trigger the gun/valve.

ti8250a