Yamaha RX-V3800 Manual De Usuario

G

SET MENU

• After you have completed the automatic setup procedure, be 

sure to disconnect the optimizer microphone.

• The optimizer microphone is sensitive to heat. Keep it away 

from direct sunlight and do not place it on top of this unit.

■

You can select the parametric equalizer type, and activate 
or deactivate each check items.

Refer to the steps 1 to 3 of “Basic procedure” on page 
41.

4k

4h

“Setup Menu” is selected as the currently selected 
menu item.

4k

n

4h

4k

n

4

ENTER

This unit performs the following checks:

Checks which speakers are connected and the 
polarity of each speaker.

Checks the distance of each speaker from the 
listening position and adjusts the timing of each 
channel.

Checks the frequency response of each speaker and 
sets the appropriate low-frequency crossover for each 
channel.

Choices: 

, Skip

• Select “Check” to automatically check and adjust 

the item.

• Select “Skip” to skip the item and perform no 

adjustments.

Parametric equalizer adjusts the level of the specified 
frequency bands. This unit automatically selects the 
crucial frequency bands for the listening room and 
adjusts the level of the selected frequency bands to 
create a cohesive sound field in the room. You can 
select the type of the parametric equalizer adjustment 
from the following choices.
Choices: 

, Check:Flat, Check:Front, 

Skip

• Select “Check:Natural” to average out the 

frequency response of all speakers with higher 
frequencies being less emphasized. Recommended 
if the “Check:Flat” setting sounds a little harsh.

• Select “Check:Flat” to average the frequency 

response of all speakers. Recommended if all of 
your speakers are of similar quality.

• Select “Check:Front” to adjust the frequency 

response of each speaker in accordance with the 
sound of your front speakers. Recommended if 
your front speakers are of much higher quality than 
your other speakers.

• Select “Skip” to skip the selected item and perform 

no adjustments.

Checks and adjusts the volume level of each speaker.
Choices: 

, Skip

• Select “Check” to automatically check and adjust 

this item.

• Select “Skip” to skip this item and perform no 

adjustments.

y
A check mark appears at the left of the parameter you set 
other then “Skip”.

When this unit detects potential problems during 
the automatic setup procedure, warning messages 
appears in the result display. See the “Auto Setup” 
section in “Troubleshooting” on page 135 for a 
complete list of warning messages and proper 
remedies.

✓

✓

✓