Sony 4-168-043-14(1) Manual De Usuario

 

 

 

 

 

 

 

 

 

Clearing the receiver’s memory may remedy 
the problem (page 30). However, note that all 
memorized settings will be reset to their initial 
settings and you will have to readjust all 
settings on the receiver.

Consult your nearest Sony dealer. Note that if 
service personnel changes some parts during 
repair, these parts may be retained.

 

(Models of area code U2 only)
With 8 ohm loads, both channels driven, from 
20 – 20,000 Hz; rated 90 watts per channel 
minimum RMS power, with no more than 
0.09% total harmonic distortion from 250 
milliwatts to rated output.

Models of area code U2

1)

Minimum RMS Output Power 
(8 ohms, 20 Hz – 20 kHz, THD 0.09%)

 

90 W + 90 W

Stereo Mode Output Power 
(8 ohms, 1 kHz, THD 1%)

100 W + 100 W

Surround Mode Output Power

2) 

(8 ohms, 1 kHz, THD 10%)

130 W per channel

Models of area code CA2, ECE, CEK, AU1

1)

Minimum RMS Output Power 
(8 ohms, 20 Hz – 20 kHz, THD 0.09%)

 

85 W + 85 W

Stereo Mode Output Power 
(8 ohms, 1 kHz, THD 1%)

100 W + 100 W

Surround Mode Output Power

2) 

(8 ohms, 1 kHz, THD 10%)

130 W per channel

1)

Measured under the following conditions:

2)

Reference power output for front, center and 
surround speakers. Depending on the sound field 
settings and the source, there may be no sound 
output.

All memorized settings

Customized sound fields

U2, CA2

120 V AC, 60 Hz

ECE, CEK, AU1

230 V AC, 50 Hz