Yamaha DSP-Z11 Manual De Usuario

■ Audio signal flow

• 2-channel as well as multi-channel PCM, Dolby Digital and DTS signals 

input at the HDMI input jacks can be output at the HDMI OUT jacks only 
when “Support Audio” is set to “Other” (see page 94).

• The following types of audio signals can be only input at HDMI input 

jacks:
– DSD
– Dolby  TrueHD
– Dolby Digital Plus
– DTS-HD Master Audio
– DTS-HD High Resolution Audio

■ Video signal flow

y

You can deinterlace and convert the resolution of the video signals by using 
“Video” parameters. See page 89 for details.

• When the analog video signals are input at the COMPONENT VIDEO, S 

VIDEO and VIDEO jacks, the priority order of the input signals is as 
follows: 
1. COMPONENT VIDEO
2. S VIDEO
3. VIDEO

• This unit is equipped with the two COMPONENT VIDEO MONITOR 

OUT jacks and HDMI OUT jacks. The COMPONENT VIDEO 
MONITOR OUT 1 and 2 outputs the same video signals and you can use 
both COMPONENT VIDEO OUT jacks simultaneously.

• Digital video signals input at the HDMI input jacks cannot be output from 

analog video output jacks.

• The analog component video signals (with 480i (NTSC)/576i (PAL) of 

resolution only) are converted to the S-video or composite video signals 
and output at the VIDEO or S VIDEO MONITOR OUT jacks.

• The GUI signal is not output at the DVR OUT and 

VCR OUT jacks and is not recorded.

“Conversion”: “On” (see page 89)