Yamaha DSP-Z11 Manual De Usuario

Connect your TV (or projector) to one of the HDMI OUT jacks, the 
COMPONENT VIDEO MONITOR OUT jacks, the S VIDEO 
MONITOR OUT jack or the VIDEO MONITOR OUT jack of this 
unit.

y

You can select to play back HDMI audio signals on this unit or on another 
HDMI component connected to the HDMI OUT jacks on the rear panel of 
this unit. Use the “Support Audio” parameter in “Option” to select the 
component to play back HDMI audio signals (see page 94).

• This unit is equipped with two HDMI OUT jacks, however cannot output 

the video signals to the both HDMI OUT jacks simultaneously. You can 
select the active HDMI OUT jack. Set the operation mode selector to 
FAMP and then press CHDMI OUT repeatedly.

• If you connect a video monitor or projector to one of the HDMI OUT jack, 

connect the component to the HDMI OUT 1 jack.

• Some video monitors connected to this unit via a DVI connection fail to 

recognize the HDMI audio/video signals being input if they are in the 
standby mode. In this case, the HDMI indicator flashes irregularly.

• The GUI menu is not overlaid on the input video image depending on the 

input video signal format and the setting of the parameters in “Wall Paper” 
(see page 91). In this case, the GUI menu appears with the wall paper or 
gray background.

• If the connected video monitor is compatible with the automatic audio and 

video synchronization feature (automatic lip sync feature), this unit adjusts 
the audio and video timing automatically (see page 88). Connect the video 
monitor to the HDMI OUT jacks on this unit to use the feature.

Make sure that this unit and other components 
are unplugged from the AC wall outlets.

P

R

P

B

V

S

Y

P

R

P

B

Y

Video in

Component video in

HDMI in

S-video in

HDMI in

Component video in