Classe Audio SSP-800/CT-SSP Manual De Usuario
55
remote Fkeys
The remote control supplied with the SSP-800/CT-SSP has four function keys
(Fkeys)
, each of which gives you instant access to a specific system function that
might otherwise be buried in the menu system.
For example, if you use the balance control frequently, you may want to consider
programming one of the Fkeys to directly access the balance control. By saving
the balance control as an Fkey function, you do not need to access the controls
page and then choose system trims, level trims, L/R balance to change the
parameter.
The remote control F1 to F4 buttons correspond to the Function Keys displayed
on the touchscreen. Select the Function Key that you would like to program,
Then to select the one you want simply scroll through the list (by touching
either the up or down arrows on the right), and then touch the specific function
you want that Fkey to perform.
important note on Fkey use
All Classé remote controls provide these same four Fkeys, so that you need not
worry about which remote you happen to pick up. Thus F1 on the Surround
Sound Processor’s remote control sends the same infrared signal as F1 on the
DVD player’s remote control and so on.
While this is intended to minimize confusion amongst different remotes (since
this aspect of them will all perform identically), you should take care when
assigning different functions on different components to the same Fkey. Doing
so can result in two components doing two different things at once, in response
to a single press of a button on the remote control. This can sometimes be
useful. As an example, F1 could set the Surround Sound Processor to the DVD
input, and also set the DVD player to Play, both from the press of a single Fkey.