Classe Audio SSP-800/CT-SSP Manual De Usuario

56

The Status screen provides several items of information on the currently playing 

disc, as well as access to information on the software used in and the internal 

sensors of the SSP. While on this page, pressing the more key will access the 

 features.

version info

The version info button on the status screen takes you to the Version 

Information screen, which displays information on various pieces of software 

used by your SSP. If you ever have occasion to call our technical support people 

to ask a question not covered in this manual, they may want to know precisely 

what version of software your unit is running. Having this information available 

will help enable them to give you the best possible service.

sensors

The sensors button on the status screen takes you to the Sensors screen, which 

displays information about several internal sensors within the SSP. It is unlikely 

you might ever need the sensor information, unless directed to do so by a 

customer service representative at Classé in order to help troubleshoot some 

unexpected problem.

Classé’s Controller Area Network, or CAN-Bus, opens the way to a new level

of interaction between our Delta range of amplifiers, preamps, processors and 

source components. When the SSP is connected with CAN-Bus, the different

elements of a Delta or CT series system are in constant communication, creating

a “global” network that delivers system wide status information and shared 

operational features, all through the touchscreen display. 

features

   CAN-Bus will allow a single touchscreen to:

•  Display status information for every connected unit, including amplifiers

which do not have a touchscreen display.

•  Create a “PlayLink” that allows an SSP or Preamp to automatically switch

to the correct input when a Delta series source component starts playback.

•  Adjust the global system brightness.

•  Configure the entire system to go in and out of standby at the touch of a

button and also bring individual components in and out of standby.

•  Mute any connected unit.