Classe Audio SSP-800/CT-SSP Manual De Usuario

57

hardware setup

Two or more Classé Delta and/or CT series products are required, at least one

of which must have a touchscreen display. 

These are ordinary network cables, commonly used for broadband Internet 

connections. They should be typical “straight through” cables not the “crossed 

over” type, and the total required will be one less than the total number of 

Delta and/or CT series components in your system.

A CAN-Bus Terminator will be required. It is inserted into the CAN-Bus

OUT connector of the last component in the CAN-Bus daisy chain. One

is included in the box with your SSP. They are also available free of charge 

from your nearest Classé Customer Support Center 

http://www.Classeaudio.com/support/service.htm

The diagram below illustrates how to connect the CAN-Bus hardware.

 

Any combination of models in any order.