JVC TK-C215VP12U/E Manual De Usuario

Follow the procedures below to connect/set this
unit.
Turn off the power of devices to be used before
connecting the cables.

The right sequence to
connect and set the camera

䢇 Before touching the camera unit, make

sure to touch the metal surface of the
[MONITOR] terminal to discharge any
static electricity from your body. Static
electricity may cause the camera to
malfunction.

䢇 When mounting the base to the ceiling, or

when connecting the cable of the camera
unit, pay enough attention to the fall of
each part.

䢇 When mounting the heater (sold

separately: KA-ZH215), read the
instruction manual of the heater carefully
before mounting.

step 1

Set the switches
(

A Pg. 20)

Remove the dome cover, followed
by setting the video image
switches.

step 2

Mounting the base
(

A Pg. 21)

Mount the base to the wall or
ceiling.

step 3

Connect the cable
(

A Pg. 22)

Connect the coaxial cable and
power supply for the heater.

step 4

Mounting the camera unit
(

A Pg. 23)

Fill the piping hole and screw hole
with a sealing material, followed
by mounting the camera unit to
the base.

step 5

Adjusting the video image
(

A Pg. 25)

Adjust the camera’s angle, focus
and brightness.

step 6

Mounting the inner dome
(

A Pg. 30)

After setting is complete, mount
the inner dome to the camera.

step 7

Mounting the dome cover
(

A Pg. 30)

Insert the silica gel into the
designated space to prevent
fogging of the dome cover,
followed by mounting the dome
cover.

TK-C215VP4_JP.book Page 19 Thursday, November 2, 2006 10:51 AM