JVC TK-C215VP12U/E Manual De Usuario
20
Remove the dome cover, followed by setting the
video image switches.
video image switches.
1.
Removing the dome cover
Remove the dome cover by unfastening the 3
fastening screws using the wrench supplied.
fastening screws using the wrench supplied.
Memo:
● The dome cover and base are connected
with fall prevention wire.
2.
Removing the inner dome
The inner dome is fastened using clips at 3
different positions. Grasp the inner dome and
remove it from the clips.
different positions. Grasp the inner dome and
remove it from the clips.
Note:
● Before touching the camera unit, make sure
to touch the metal surface of the [MONITOR]
terminal to discharge any static electricity
from your body. Static electricity may cause
the camera to malfunction.
terminal to discharge any static electricity
from your body. Static electricity may cause
the camera to malfunction.
3.
Setting the switches
Set the switches for video images.
(
(
Setting the switches
Wrench (Supplied)
Fall Prevention
Wire
Wire
*TK-C215VP4U/E is used in the above illustration
2
3
LL PHASE
1
2
O
N
3
4
5
6
7
2
4
4
WHT.
BAL.
8
Inner
Dome
Dome
Clip(x 3)
*TK-C215VP4U/E is used in the above illustration
TK-C215VP4_JP.book Page 20 Thursday, November 2, 2006 10:51 AM