Bosch 550 Manual De Usuario
64
en |
MIC Series 550 Camera
F.01U.239.454 | 3.0 | 2012.09
User Manual
Bosch Security Systems, Inc.
210
Digital Zoom Enable
Enables the camera to continue into the digital zoom
once the optical limit has been reached, as long as
Digital Zoom is enabled under the MIC Setup tab.
215
Auto Home to Pattern
With Auto Home turned on, the camera can be
configured to move to play pattern tour 1 using the
"Home To" setting. The amount of time before this
takes place can be set to 30 seconds, 1 minute, 5
minutes, or 1 hour using the "Home Time" Setting in
"Advanced Controls."
217
Auto Flip On
218
Auto Flip Off
Turns off the Autoflip function.
219
Wash Wipe Enable
Upon activation, the camera moves to the Wash Wipe
Position, which should be set to look at the washer
nozzle, starts the washer pump, and turns on the
wiper. Once released, the unit returns to its original
position, stops the washer pump, and continues wiping
for a few seconds. This process occurs only if the Wash
Wipe command is turned on; otherwise, the camera
activates the washer pump but will not move. If you
want to use an external washer, then you should
purchase either the MIC-WKT (washer nozzle and
bracket and MIC-WSH card) or the MIC-WKT-IR
(washer nozzle and bracket) to enable a third party
washer pump to be installed.
220
Wash Wipe Disable
Disables the Wash Wipe function.
232
Privacy: Replace All
Replaces all masks.
233
Privacy: Uncover All
Uncovers all masks.
251
Recalibrate Camera Module Enables/disables the preset to recalibrate the camera.
255
Load Factury Defaults
Resets settings, including presets
Preset
Number
Command
Description