Toshiba 6520c Manual De Usuario

e-STUDIO5520C/6520C/6530C

1-5

1. General Adjustments – Copying, Printing and e-Filing (Output from Box)

1.2 To Adjust the Density on a Solid Colored Image

If the density is decreased

If the density is increased

The solid colored area becomes lighter.

The solid colored area becomes darker.

Explanation

In thick paper printing, the density of a solid colored image can be made darker to enhance it or lighter in order

to match with the type or color of the original.

<Notes> • The function described in this chapter cannot be used for plain paper 1 and 2 in the full color

mode.

The type of plain paper 1 and 2 is as follows.

Paper type not available

Acceptable paper weight

Plain paper 1

64 to 80g/m²

Max. 20 lb. Bond

Full color

Plain paper 2

81 to 105g/m²

Max. 28 lb. Bond

Do not use the following code corresponding to plain paper 1 and 2 for the adjustment.

Paper type

Color to adjust

[08] code

Subcode

Y (yellow)

M (magenta)

C (cyan)

Full color /

Black

Plain paper 1, 2

K (black)

08-2513

• When performing the adjustment in accordance with the procedure, note that the density of a

gradation area (halftone), such as a photograph, is adjusted as well as that of a solid colored

image.