Fujitsu P3NK-4452-01ENZD Manual De Usuario

XG Series User's Guide

Chapter 5 Command Reference

Device Information Settings

Function

Set the IPv6 SSH FTP server function

Available Model

XG0224 / XG0448 / XG2600

Syntax

serverinfo sftp ip6 <mode>

Options

<mode>
•

on
Enable IPv6 SSH FTP server function

•

off
Disable IPv6 SSH FTP server function

Use Mode

Configuration mode (admin class)

Explanation

Set whether or not to enable IPv6 SSH FTP server function
Setting this command OFF and the

 command OFF will reject a 

connection request using the IPv6 address from the sftp client.
Setting this command OFF and the 

connection request using the IPv6 address from the sftp client after the password was 
entered.

Caution

Enabling this command generates an SSH host authentication key at device power-on or 
execution of the 

 command, and it takes several tens of seconds to several 

minutes for the processing time. sftp connection is enabled after the SSH host 
authentication key generation was completed.
If this device has been started to enable this function while all the ssh and sftp functions 
were Off, it also takes several tens of seconds to several minutes for the processing time 
to generate an SSH host authentication key. Note that other processes may be affected; 
session monitoring timeout may occur, for example.

Default

It is assumed that the IPv6 SSH FTP server function is enabled.

Function

Set the TELNET server function.

Available Model

XG0224 / XG0448 / XG2600

Syntax

serverinfo telnet ip <mode>

Options

<mode>
•

on
Enable the TELNET server function.

•

off
Disable the TELNET server function.

Use Mode

Configuration mode (admin class)

Explanation

Set whether or not to enable the TELNET server function.

Default

It is assumed that the TELNET server function is enabled.

serverinfo sftp ip6 on

serverinfo telnet ip on