Fujitsu P3NK-4452-01ENZD Manual De Usuario

XG Series User's Guide

Chapter 5 Command Reference

Device Information Settings

Function

Set the IPv6 telnet server function

Available Model

XG0224 / XG0448 / XG2600

Syntax

serverinfo telnet ip6 <mode>

Options

<mode>
•

on
Enable telnet server function

•

off
Disable telnet server function

Use Mode

Configuration mode (admin class)

Explanation

Set the IPv6 telnet server function

Default

It is assumed that the IPv6 TELNET server function is enabled.

Function

Set the application filter for the TELNET server function.

Available Model

XG0224 / XG0448 / XG2600

Syntax

serverinfo telnet filter <count> <action> acl <acl_count>

Options

<count>
•

Filtering definition number
Specify a definition number, which indicates a filtering priority, with a decimal value 
from 0 to 29.
A smaller value has a higher priority.

<action>

Specify an operation when filtering conditions are satisfied.

•

accept
Transmit the relevant packet.

•

reject
Block the relevant packet.

<acl_count>
•

ACL definition number
Specify the required ACL definition number with a decimal value.
If the ACL specified in <acl_count> is not specified, the filtering definition will be 
disabled and ignored.
The following ACL definition is available for application filtering.

•

ip
Set only the source IP address and the number of mask bits.
If the ip value is not set, the filtering definition will be disabled and ignored.

Use Mode

Configuration mode (admin class)

Explanation

Set the application filter for the TELNET server function.

Default

It is assumed that the application filter is not set for the TELNET server function.

serverinfo telnet ip6 on