3com MIC-3365 Manual De Usuario
8
3C
OM
I
MPACT
ISDN E
XTERNAL
D
IGITAL
M
ODEM
Q
UICK
S
TART
I
NSTRUCTIONS
4
Double-click the 3Com Impact icon to access the 3Com
Impact Configuration dialog box.
Impact Configuration dialog box.
COM1 is the default COM port.
■
If the digital modem is connected to COM1, the 3Com
Impact Configuration dialog box appears, as shown in
Figure 2. Go on to step 5.
Impact Configuration dialog box appears, as shown in
Figure 2. Go on to step 5.
■
If the digital modem is not connected to COM1, the
COM Port Provisioning dialog box appears. Choose the
COM port to which the digital modem is connected. Click
Connect. The 3Com Impact Configuration dialog box
appears, as shown in Figure 2.
COM Port Provisioning dialog box appears. Choose the
COM port to which the digital modem is connected. Click
Connect. The 3Com Impact Configuration dialog box
appears, as shown in Figure 2.
Figure 2
Configuration Dialog Box
A status bar below the Help, Tools, Configure, and Exit
buttons provides the following ISDN status information:
buttons provides the following ISDN status information:
■
Layer 1 status
■
Service Profile Identifier (SPID) for telephone numbers 1 and 2
■
Terminal Endpoint Identifiers (TEI) 1 and 2 (for information
purposes only)
purposes only)
09-0700-002 Page 8 Sunday, December 22, 1996 3:40 PM