3com MIC-3365 Manual De Usuario

A message bar at the bottom of the dialog box provides help 
for completing the fields. If you click in a field, the message 
bar tells you what information to enter in the field. The 
message bar also provides status information about the 
digital modem. If the digital modem is disconnected from 
the ISDN telephone line, for example, a message indicates 
this condition.

The right side of the dialog box shows the digital modem 
software version, along with any installed options (such as 
Multilink PPP or internal analog fax modem).

5 Select the type of switch, as specified by your telephone 

company, from the Telephone Company Switch 
drop-down list box.

6 Click in the Telephone Number field in the Number 1 area 

and enter the telephone number to which your digital 
modem is connected.

7 Click in the Service Profile Identifier (SPID) field and enter 

the corresponding SPID for the telephone number you 
entered in the previous step. 

You should have received this SPID from your telephone 
company. 

CAUTION: If the ISDN line has been configured with only one 
telephone number (Point-to-Point), do not include the SPID.

8 Specify which device should receive the calls coming to 

Telephone Number 1.

You can select Phone Port or Internal Fax/Modem. If your 
model has the internal analog fax modem installed
(Models 3C872 and 3C877), you can select both.

If both boxes are checked, the internal analog fax modem and 
the phone will both ring, enabling you to answer using either 
device.

09-0700-002  Page 9  Sunday, December 22, 1996  3:40 PM