Cisco Systems 78 Manual De Usuario

Before connecting the server, PC, or workstation, see Table 2-2 to determine how 
to set the router TO HUB/TO PC button. 

To connect one of these devices, follow the steps in Figure 2-2.

To verify your connection, ensure that the appropriate Ethernet LED is on after 
the router installation. For example, if you have connected the cable to Ethernet 
port 4, ensure that the ETHERNET 4 LED on the front panel is on.

If the LED is not on, see Table 3-2 in Chapter 3 for troubleshooting information.

56635

PC

AUX

SER 0

ETH

OK

LAN

3. Connect other end of cable 

to server, PC, or workstation.

2. Connect yellow cable

to ETHERNET 4 port
on Cisco 828 or
SOHO 78 router.

1. Set TO HUB/TO PC button.

Cisco 828 router