Cisco Systems 9001 Manual De Usuario

The RP card has eight discrete LED indicators for display of system information.

 lists the display definitions of the eight discrete LEDs on the RP front panel as well as the 

normal LED states on the power modules (AC or DC) and the fan tray after a successful system startup.

RSP FAIL

Bi-color

Red

RSP in initializing or failed state.

Green

RSP is up and running.

Off

RSP is normal.

LC FAIL

Bi-color

Red

LC in initializing or failed state.

Green

LC is up and running.

Off

LC is normal.

Critical Alarm 
(CRIT)

Single color

Red

Critical Alarm LED. A critical alarm has occurred.

Off 
(Default after reset)

No critical alarm has occurred.

Major Alarm (MAJ)

Single color

Red

Major alarm LED. A major alarm has occurred.

Off 
(Default after reset)

No major alarm has occurred.

Minor Alarm (MIN)

Single color

Amber

Minor alarm LED. A minor alarm has occurred.

Off 
(Default after reset)

No minor alarm has occurred.

External USB 2.0

(EUSB)

Single color

Green

External USB is busy/active. The LED is driven by the 
USB controller.

Off 
(Default after reset)

External USB is not busy/active.

Alarm Cutoff (ACO) Single color

Amber

Alarm Cutoff has been enabled. The ACO push button 
was pressed after at least one alarm has occurred.

Off 
(Default after reset)

Alarm Cutoff is not enabled.

Note: ACO LED is not in use and will always be OFF.

Synchronization 
(SYNC)

Bi-color

Green

Sync - Time core is synchronized  to an external source 
(either GPS or IEEE1588).

Amber

Not used.

Off
(Default after reset)

Time core clock synchronization is either disabled OR 
Time core is synchronized with external source 
excluding GPS and IEEE1588

FAIL/OK
(Power Module)

Bi-color

Green

Refer 

 for detailed description.

Amber

Refer 

 for detailed description.