Cisco Systems 7500 Series Manual De Usuario

This chapter includes specific information about required tools and parts, safety guidelines, and 
preparatory information required to ensure a successful installation of your Cisco 7500 series router.

Do not unpack the Cisco 7500 series router until you are ready to install it. Keep the chassis in the 
shipping container to prevent accidental damage until you have determined where you want it installed. 
Use the appropriate unpacking documentation included with your Cisco 7500 series router. 

The Cisco Information Packet provides safety, and service, and support information, and is included in 
the shipping container, together with any companion publications you specified on your order. Inspect 
all items for shipping damage. If anything is damaged, immediately contact a customer service 
representative. 

Sections in this chapter include the following:

Following are the tools and parts generally required to install your Cisco 7500 series router: 

Number 1 Phillips and 3/16-inch (0.476 cm) flat-blade screwdrivers; additional tools, parts, and 
procedures listed and discussed in companion documentation

Rack-mount kit (hardware and accompanying documentation)

If you are installing the Cisco 7500 series router in a rack, you might also need the following tools:

Number 2 Phillips screwdriver 

1/4-inch flat-blade screwdriver

Tape measure

Level