Cisco Systems WAP4410N Manual De Usuario
Configuring the WAP4410N Wireless-N Access Point
Wireless
WAP4410N Wireless-N Access Point with Power Over Internet
30
6
Configuring WAP2-Personal Security
This security mode supports the WPA2-Personal protocol.
To enable wireless WPA2-Personal security, follow these steps:
STEP 1
Click Wireless > Security.
STEP 2
From the Security Mode drop-down menu, select WAP2-Personal.
STEP 3
To enable wireless isolation within the SSID, click Enabled.
STEP 4
Provide the following information:
•
WPA Algorithms—(Read-only) WPA2-Personal automatically chooses AES
for data encryption.
for data encryption.
•
Pre-Shared Key—Enter a WPA Shared Key of 8–63 characters.
•
Key Renewal—Enter a key renewal timeout period, which instructs the
access point how often it should change the encryption keys. The default is
3600 seconds.
access point how often it should change the encryption keys. The default is
3600 seconds.
STEP 5
Click Save.