Cisco Systems WAP4410N Manual De Usuario
Configuring the WAP4410N Wireless-N Access Point
Wireless
WAP4410N Wireless-N Access Point with Power Over Internet
31
6
Configuring WPA2-Personal Mixed Security
This security mode supports the transition from WPA-Personal to WPA2-Personal.
You can have client devices that use either WPA-Personal or WPA2-Personal. The
access point will automatically choose the encryption algorithm used by each
client device.
You can have client devices that use either WPA-Personal or WPA2-Personal. The
access point will automatically choose the encryption algorithm used by each
client device.
To enable wireless WPA2-Personal Mixed security, follow these steps:
STEP 1
Click Wireless > Security.
STEP 2
From the Security Mode drop-down menu, select WPA2-Personal Mixed.
STEP 3
To enable wireless isolation within the SSID, click Enabled.
STEP 4
Provide the following information:
•
WPA Algorithms—(Read-only) The WPA2-Personal Mixed security mode
automatically chooses TKIP or AES for data encryption.
automatically chooses TKIP or AES for data encryption.
•
Pre-Shared Key—Enter a WPA Shared Key of 8–63 characters.
•
Key Renewal— Enter a key renewal timeout period, which instructs the
access point how often it should change the encryption keys. The default is
3600 seconds.
access point how often it should change the encryption keys. The default is
3600 seconds.
STEP 5
Click Save.