Cisco Systems WAP4410N Manual De Usuario
Configuring the WAP4410N Wireless-N Access Point
Wireless
WAP4410N Wireless-N Access Point with Power Over Internet
32
6
Configuring WPA-Enterprise Security
The WPA-Enterprise mode features WPA used in coordination with a RADIUS
server for client authentication.
server for client authentication.
!
CAUTION
Use this mode only when a RADIUS server is connected to the access point.
To enable wireless WPA-Enterprise security, follow these steps:
STEP 1
Click Wireless > Security.
STEP 2
From the Security Mode drop-down menu, select WPA-Enterprise.
STEP 3
To enable wireless isolation within the SSID, click Enabled.
STEP 4
Provide the following information:
•
Primary/Backup RADIUS Server—Enter the IP address of the RADIUS
server. The Backup Radius server is used only if the primary server is
unavailable.
server. The Backup Radius server is used only if the primary server is
unavailable.
•
Primary/Backup RADIUS Server Port—Enter the port number used by the
RADIUS server. The default is 1812. The backup Radius server is used only
if the primary server is unavailable.
RADIUS server. The default is 1812. The backup Radius server is used only
if the primary server is unavailable.