Cisco Systems IPMUX-1E Manual De Usuario
Appendix E Configuration Menus
IPmux-1/1E Installation and Operation Manual
E-16 General
Configuration
Set Default Parameters
Setting Default Parameters reconfigures the device according to default
parameters. Before overwriting the system, the warning in
parameters. Before overwriting the system, the warning in
appears
asking you to confirm your selection.
Configuration will be overwritten and system will RESET.
Continue ? (Y/N)
Figure E-21. Reset Default Warning
To overwrite the system and reconfigure it according to default settings:
1. At the prompt (
1. At the prompt (
), do one of the following:
Type Y.
A prompt appears asking for confirmation.
Are you sure? Y/N
Figure E-22. Reset Confirmation
1. Type Y.
A second prompt appears asking for confirmation (if you have
configured the Host):
configured the Host):
Save Host Connection? Y/N
Figure E-23. Host Confirmation
2. Perform one of the following:
Type Y.
The Default Configuration returns all the Default Settings, except
for Host IP, Default Gateway, and Managers.
for Host IP, Default Gateway, and Managers.
OR
Type N.
The Default Configuration returns all the Default Settings, and
deletes the Host IP, Default Gateway, and Managers.
deletes the Host IP, Default Gateway, and Managers.
OR
Type N to exit and return to the General Configuration menu.
2. Following this, IPmux-1/1E performs an automatic Reset.
Main Menu
↓
2. Configuration
↓
1. General
Configuration
↓
6. Set Default
Parameters
Parameters