Cisco Systems UBR7100E Manual De Usuario
1-7
Cisco uBR7100 Series and Cisco uBR7100E Series Universal Broadband Router Hardware Installation Guide
OL-5916-01
Chapter 1 Product Overview
Field-Replaceable Units
Note
Only one downstream connector should be connected and used for data traffic on the network at any one
time. On the Cisco uBR7111 and Cisco uBR7114 routers, the second downstream connector, however,
can be used for local monitoring purposes.
time. On the Cisco uBR7111 and Cisco uBR7114 routers, the second downstream connector, however,
can be used for local monitoring purposes.
The Cisco uBR7111 and Cisco uBR7111E routers support one upstream port, and the Cisco uBR7114
and Cisco uBR7114E routers support four upstream ports.
and Cisco uBR7114E routers support four upstream ports.
Field-Replaceable Units
Cisco uBR7100 series routers have the following field-replaceable units (FRUs):
•
•
•
•
Port Adapters
The Cisco uBR7100 series routers support a wide range of port adapters. Supported port adapters
include: Ethernet, Fast Ethernet, Synchronous Serial, HSSI, ATM, and SONET interfaces, see
include: Ethernet, Fast Ethernet, Synchronous Serial, HSSI, ATM, and SONET interfaces, see
.
Note
For the most current information on the supported port adapters in the Cisco uBR7100 series routers, see
the Cisco IOS release notes or the Cisco Product Catalog at the following URL:
the Cisco IOS release notes or the Cisco Product Catalog at the following URL:
All port adapters available for the Cisco uBR7100 series routers connect directly to the router and are
locked into position by a locking tab and two screws (see
locked into position by a locking tab and two screws (see
). Refer to the specific port adapter
documentation at the following URL:
Figure 1-4
Port Adapter Locking Tabs
Unlocked
Locked
5
I
ACT ACT
LNK
1
PWR
SLOT 0
SLOT 1
PWR
SYS
RDY
RDY
DS0
RF
uBR7114
US0
EN
DS0
US1
US2
US3
CONS
AUX
FE 0/1
FE 0/0
36092