Cisco Systems OL-7396-01 Manual De Usuario
C H A P T E R
7-1
ATM Switch Router Software Configuration Guide
OL-7396-01
7
Configuring Virtual Connections
This chapter describes how to configure virtual connections (VCs) in a typical ATM network after
autoconfiguration has established the default network connections. The network configuration
modifications described in this chapter are used to optimize your ATM network operation.
autoconfiguration has established the default network connections. The network configuration
modifications described in this chapter are used to optimize your ATM network operation.
Note
This chapter provides advanced configuration instructions for the Catalyst 8540 MSR,
Catalyst 8510 MSR, and LightStream 1010 ATM switch routers. For an overview of virtual connection
types and applications, refer to the Guide to ATM Technology. For complete descriptions of the
commands mentioned in this chapter, refer to the ATM Switch Router Command Reference publication.
Catalyst 8510 MSR, and LightStream 1010 ATM switch routers. For an overview of virtual connection
types and applications, refer to the Guide to ATM Technology. For complete descriptions of the
commands mentioned in this chapter, refer to the ATM Switch Router Command Reference publication.
The tasks to configure virtual connections are described in the following sections:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•