Cisco Systems OL-7396-01 Manual De Usuario

The following example configures the global default access filter for ILMI address registration to allow 
well-known group addresses and addresses with matching prefixes:

Switch(config)# atm ilmi default-access permit matching-prefix wellknown-groups

See the command atm address-registration in the ATM Switch Router Command Reference publication 
for information on configuration of the individual interface access filter override. 

To display the global ILMI default access configuration, use the following privileged EXEC command:

The following example displays the ILMI filter configuration for all ATM interfaces:

Switch# more system:running-config

Building configuration...

Current configuration:

<information deleted>

!

atm abr-mode efci

atm lecs-address-default 47.0091.8100.0000.0040.0b0a.1281.0040.0b4e.d023.00 1

atm lecs-address-default 47.0091.8100.0000.0040.0b0a.1281.0040.0b07.4023.00 2

atm ilmi default-access permit matching-prefix

atm address 47.0091.8100.0000.0040.0b0a.2b81.0040.0b0a.2b81.00

atm address 47.0091.8100.0000.0060.3e5a.7901.0060.3e5a.7901.00

atm router pnni

 statistics call

 node 1 level 56 lowest 

To configure the LECS address advertised to the directly connected end nodes, use the following global 
configuration command:

The sequence-number provides the position of this address in the ordered LECS address table.

The following example shows how to configure the LECS ATM address:

Switch(config)# atm lecs-address 47.0091.8100.0000.0000.0ca7.9e01.4000.0c81.9030.01

Displays the global ILMI default access 
configuration.

atm lecs-address lecs-address 
[sequence-number]

Configures the switch LECS address.