Cisco Systems OL-7396-01 Manual De Usuario

To display the switch ILMI configuration, use the following EXEC commands:

The following example shows the ATM address and the LECS address:

Switch# show atm addresses

 

Switch Address(es):

  47.00918100000000000CA79E01.00000CA79E01.00 active

  88.888888880000000000000000.000000005151.00

 

Soft VC Address(es):

  47.0091.8100.0000.0000.0ca7.9e01.4000.0c81.0000.00 ATM0

  47.0091.8100.0000.0000.0ca7.9e01.4000.0c81.8000.00 ATM3/0/0

  47.0091.8100.0000.0000.0ca7.9e01.4000.0c81.8010.00 ATM3/0/1

  47.0091.8100.0000.0000.0ca7.9e01.4000.0c81.8020.00 ATM3/0/2

  47.0091.8100.0000.0000.0ca7.9e01.4000.0c81.8030.00 ATM3/0/3

  47.0091.8100.0000.0000.0ca7.9e01.4000.0c81.9000.00 ATM3/1/0

  47.0091.8100.0000.0000.0ca7.9e01.4000.0c81.9010.00 ATM3/1/1

  47.0091.8100.0000.0000.0ca7.9e01.4000.0c81.9020.00 ATM3/1/2

  47.0091.8100.0000.0000.0ca7.9e01.4000.0c81.9030.00 ATM3/1/3

 

ILMI Switch Prefix(es):

  47.0091.8100.0000.0000.0ca7.9e01

  88.8888.8888.0000.0000.0000.0000

 

ILMI Configured Interface Prefix(es):

 

LECS Address(es):

  47.0091.8100.0000.0000.0ca7.9e01.4000.0c81.9030.01

  47.0091.8100.0000.0000.0ca7.9e01.4000.0c81.9030.02

Since Cisco IOS Release12.0(1a)W5(5b) of the system software, addressing the interface on the route 
processor (CPU) has changed for Catalyst 8510 and LightStream 1010 platforms. The ATM interface is 
now called atm0, and the Ethernet interface is now called ethernet0. Old formats (atm 2/0/0 and 
ethernet 2/0/0) are still supported.

The following example shows the ILMI configuration:

Switch# show atm ilmi-configuration

Switch ATM Address (s) : 

1122334455667788990112233445566778899000           

LECS Address (s):

1122334455667788990011223344556677889900

Displays the ATM addresses.

Displays the ILMI configuration. 

Displays the ILMI status.